Outdoor Controller with Long Range Antenna

PSC-ZKV-WCM-100-BLE-CB/EXA

  • Single-channel wireless fixture controller with 0-10V dimming output.
  • Compatible with Casambi wireless mesh networks for wireless control and dimming of LED lighting.
  • Integrated long-range antenna supports extended Bluetooth communication.
  • Provides an active-high 10-22 VDC output for relay or load control.
  • Supports high-end trim adjustment, zoning, and continuous dimming.
  • Operates on 12-24 VDC input.
  • IP65 rated for indoor and outdoor applications.
  • Quick-connect design mounts directly to a fixture or luminaire using a compatible receptacle.
  • Configured through the Casambi App for setup, control, real-time feedback, and scheduling.
  • ioXt Alliance cybersecurity certified.

This is an In-Stock Standard Item, however, please confirm availability with your Casambi Representative or Customer Service. Need more info on the product specs? The specification sheet has all the details.

FIND A CASAMBI REP NEAR YOU

DOWNLOAD SPEC SHEET

Similar products

Zone Controllers

Single Channel 0-10v Module w/ Integral Relay and 24vdc

Model Number: NAPPK DALI-0-10V-1CH-CAS

  • AC powerpack controller with 1-channel 0–10V/DALI dimming

  • Supports 20 A resistive loads and 16 A lighting loads

  • Casambi Ready with 12 V and 24 V auxiliary outputs

  • UL Listed and plenum rated

CUPOWER

New

Zone Controllers

DALI Controller 4000 Series

Model Number: SAL-40XX

  • Integrates Wired DALI Drivers into Casambi
  • Supports DALI D4i, DT6, and DT8 Standards
  • DALI Driver Address Capacity (16 / 32 / 64 Max)
  • Includes 130 mA Integrated DALI Bus Power Supply

Casambi

New

Zone Controllers

Wireless Control Phase Angle Dimmer

Model Number: CAS_FDLR05BPD

• Typical range: 50–150 ft; longer in open areas
• Supports up to two repeaters; rebroadcasts original signal

RIB Functional Devices

Zone Controllers

Single Channel Module w/ Integral Relay

Model number: PSC-WCM-450-BLE-CB

• Line Voltage Input Single Channel Module with 0-10VDC Dimming Output
• Sensor/Control Input for Relay/Load Control and 12VDC Auxiliary Output
• Switching Relay with Zero-Crossing
• Approved For Lighting And Plug Loads

mwConnect
View all