Casambi Ready Products

Dual Channel 0-10V/DALI Dimming Module

Model Number: CBU-A2D
• 2-channel 0-10V/DALI controller
• Supports universal input voltage: 100–277 VAC
• Driver Box Mounted
• Optional DALI mode for use with DALI drivers or sensors

Casambi

0–10V Controller with Relay

Model Number: CBU-ARP-LR / REPLACES CBU-ARP
• 1-channel 0–10V controller with built-in 2.0 A relay
• Knockout Mounted
• Includes input for a motion sensor (12–24 VDC)
• 2a Relay cuts power if the driver can’t fully turn off via 0–10V dimming

Casambi

MultiDim-PWM & 0-10V Controller

Model Number: MultiDim
• 2 PWM Dimmers for 12–48VDC LED Strips
• 2 0–10V Dimming Outputs for Tunable White
• Mix & Match PWM and 0–10V Control

LEDbyDESIGN

Fixture Level Dimming Module

Model Number: CBU-TDP-LR / REPLACING CBU-TDP
• Supports up to 50 W at 120 VAC
• Knockout Mounted
• Trailing-edge dimming for incandescent and dimmable LED loads
• Built-in overcurrent and over-temperature protection

Casambi

5-Channel Constant Voltage PWM Dimmer

Model Number: PWM5-Pro
• 5-Channel Independent PWM Dimming for RGBWW
• Designed for 12–24VDC Constant Voltage LED Loads

LEDbyDESIGN

4-Channel PWM LED Dimmer

Model Number: CBU-PWM4-4-LR / REPLACES CBU-PWM4-4
• 4-Channel Independent PWM dimmer for RGBW
• Connects between 12–24 VDC constant voltage power supply and LED load
• 2-Channel Tunable White (TW) applications
• Single Channel Static White

Casambi

Trailing-Edge Dimmer Module

Model Number: CBU-TED-LR / REPLACING CBU-TED
• Supports up to 50 W at 120 VAC
• Driver box mounted
• Trailing-edge dimming for incandescent and dimmable LED loads
• Overcurrent and over-temperature protection

Casambi

0-10v Single Channel Dimming Module w/ Antenna

Model Number: PSC-WCM-50-BLE-CB
• Low Voltage Input
• Driver Box Mounted
• External Antenna
• Active High Output For Relay Drive

mwConnect

8-Channel DMX Master

Model Number: casDMX
• Connects to and controls DMX-Enabled Fixtures and Devices
• Operates Between 12–24VDC
• Non-Isolated DMX Output

DMX Engineering

DALI Controller 4000 Series

Model Number: SAL-40XX
• Integrates Wired DALI Drivers into Casambi
• Supports DALI D4i, DT6, and DT8 Standards
• DALI Driver Address Capacity (16 / 32 / 64 Max)
• Includes 130 mA Integrated DALI Bus Power Supply

Casambi

Wireless Control Phase Angle Dimmer

Model Number: CAS_FDLR05BPD
• Works with EnOcean® 902 MHz switches/transmitters
• Typical range: 50–150 ft; longer in open areas
• Supports up to two repeaters; rebroadcasts original signal

RIB Functional Devices

Single Channel Module w/ Integral Relay

Model number: PSC-WCM-450-BLE-CB
• Line Voltage Input Single Channel Module with 0-10VDC Dimming Output
• Sensor/Control Input for Relay/Load Control and 12VDC Auxiliary Output
• Switching Relay with Zero-Crossing
• Approved For Lighting And Plug Loads

mwConnect

Forbes & Lomax Casambi-Compatible Rotary Dimmer

• Casambi-compatible 0–10V rotary dimmer

• Requires 10CAS interface for Casambi integration

• Requires PSC-AC-PP-400 power supply

• Fits standard North American gang boxes

Forbes & Lomax

Wireless Bluetooth 4-Button Light Switch

Model Number: BTT-S4BWH

• Dual-powered: CR2032 battery or 5–30 VDC

• Dimming, on/off, scene & momentary control

• Fits standard single or multi-gang switch boxes

Illumra

Touchscreen Room Control

Model Number: CAS_1547057

• Sleek design with a 4.8-inch high-resolution glass touch display
• On/Off, dimming, color temperature, and RGB color picker
• Integration with building management systems

Thermokon Sensortechnik GmbH

Dual Rocker Wall Switch

Model Number: BTT-S2AWH

• Battery-free wireless control powered by kinetic energy

• No wiring required; mounts in standard boxes or on any surface

• Supports on/off, dimming, and momentary control

• Tamper-resistant, durable design for long-lasting performance

Illumra

Wireless Single Rocker Wall Switch

Product Number: PSC-EO-WS-100-BLE

Single Rocker(2 button), wireless self-powered wall controller providing automatic lighting control for a variety of indoor applications.

mwConnect

Wall-mounted Transmitters W/ Bluetooth Low Energy

Model Number: LS990
• Wall-mounted transmitters with BLE
• Wireless, battery-free operation using EnOcean energy harvesting
• Controls switching, dimming, and scenes without external power

JUNG

Xpress Switch

Model Number: Xpress-LR / REPLACES Xpress
• Battery Powered
• 4 Presets for Scene control + Dimming and TW Adjustments.
• No wiring; switch can be placed anywhere
• Magnetic Wall Mount

Casambi

4-Button Battery Wall Switch

Model Number: WS-NC04-N2
• Wireless 4-button wall switch with no wiring required
• Battery Powered
• Mounts in any Standard Wall Box

Magtech Industries Corp.

6-Button Battery Wall Switch

Model Number: WS-NC06-N2
• Wireless 6-button wall switch with no wiring required
• Battery Powered
• Mounts in any Standard Wall Box

Magtech Industries Corp.

8-Button Battery Wall Switch

Model Number: WS-NC08-N2
• Wireless 8-button wall switch with no wiring required
• Battery Powered
• Mounts in any Standard Wall Box

Magtech Industries Corp.

4-Button AC Input Wireless In-Wall Switch

Model Number: WS-TA04-02
• Utility powered in-wall switch with scene controls
• 8-button multi-function design with local circuit operation
• Long-range 20 dBm 2.4 GHz wireless communication
• Fits standard 1-gang U.S. wall box

Magtech Industries Corp.

6-Button AC Input Wireless In-Wall Switch

Model Number: WS-TA06-02
• Utility powered in-wall switch with scene controls
• 8-button multi-function design with local circuit operation
• Long-range 20 dBm 2.4 GHz wireless communication
• Fits standard 1-gang U.S. wall box

Magtech Industries Corp.

8 Buttons AC Input Wireless In-Wall Switch

Model Number: WS-TA08-02
• Utility powered in-wall switch with scene controls
• 8-button multi-function design with local circuit operation
• Long-range 20 dBm 2.4 GHz wireless communication
• Fits standard 1-gang U.S. wall box

Magtech Industries Corp.

Wireless 4-Button Wireless Wall Switch

Model number: PSC-DM-WS-400-BLE-CB
• Programable to control Fixtures, Groups, Scenes
• LED Status Indicator Light
• Mounts in any Standard Wall Box
• 120 -277v ac

mwConnect

Wireless 2-Button Occupancy Sensor Switch

Model number: PSC-DM-I-WS-200-BLE-CB
• Programable to control Fixtures, Groups, Scenes
• Passive Infrared (PIR) Occupancy Sensor
• LED Status Indicator Light
• Mounts in any Standard Wall Box
• 120 -277v ac

mwConnect

Wireless 2-Button Wireless Swich

Model Number: PSC-DM-WS-200-BLE-CB
• Programable to control Fixtures, Groups, Scenes
• LED status indicator light
• Mounts in any standard wall box
• 120 -277v ac

mwConnect

Wireless 1-Button Wall Switch Controller

Model Number: PSC-DM-WS-100-BLE-CB
• Programable to control Fixtures, Groups, Scenes
• LED status indicator light
• Mounts in any standard wall box
• 120 -277v ac

mwConnect

Wireless 1-Button Occupancy Sensor Switch

Model Number: PSC-DM-I-WS-100-BLE-CB
• Programable to control Fixtures, Groups, Scenes
• Passive Infrared (PIR) Occupancy Sensor
• LED Status Indicator Light
• 120 -277v ac

mwConnect

IRIS PHOTODIODE SENSOR

Model Number: CES/I-B-CS
• Daylight sensor with Bluetooth 5.0 wireless transmission
• Powered by 24 VDC external driver or power supply
• Measures light levels from 0 to 100 fc (0 to 1076 lux)

PLC-Multipoint

PIR Line Voltage Occupancy Sensor

Model Number: PSC-BL-I-FM-110-BLE-CB
• PIR Hi/Low Bay Sensor
• 100-277VAC Input Voltage
• 0-10V Output to LED Driver
• Relay with Zero CrossingLED Motion indicator
• Mounting height up to 40ft (12.2m) 360° coverage pattern

mwConnect

Microwave Bi-Level Compact Occupancy Sensor

Compact microwave occupancy sensor suitable for indoor/outdoor applications. Supports 0-10V dimming. Specified for mounting heights up to 30 ft (9m).

mwConnect

PIR Bi-level Fixture Mount Occupancy Sensor

Model Number: PSC-BL-I-FM-DC0-BLE-CB
• Low Profile PIR sensor
• Mounts in Fixture
• Suitable for indoor or outdoor use
• Mounting height up to 40 ft (12.2 m)

mwConnect

PIR Bi-level Remote Head Occupancy Sensor

Model Number: PSC-BL-I-RT-DC0-BLE-CB
• PIR sensor
• Active High output for Relay drive
• Mounting height of 10ft (3m)
• Mount in Fixture

mwConnect

PIR Bi-level Remote Head Occupancy Sensor with Daylight Harvesting

Model Number: PSC-BL-I-RD-DC0-BLE-CB
• PIR and Daylight sensor
• Mount in Fixture
• High-End Trim, Zoning, Continuous Dimming

mwConnect

PIR Non-Dimming Ceiling Mount Sensor

Model Number: PSC-ND-I-CM-DC-BLE-CB
• Passive infrared occupancy sensor
• Ceiling Mount
• Mounting height up to 12ft (3.6m)
• 360° Coverage Pattern

mwConnect

Bluetooth DALI Controller

Model Number: CBU-DCS
• Powered by DALI bus (no internal power supply)
• Works with DALI sensors for presence detection and daylight harvesting
• Controls DALI drivers with integrated DALI bus power supply

Casambi

Casambi Cloud Gateway

Model Number: CGW-001-PSU / CGW-001-POE
• Join multiple Casambi networks into a single site
• Full time remote connection capability
• Upload Network Configuration to the Cloud

Casambi

Casambi to DMX Scene Controller

Model Number: SceneDMXcas
• Connects a standard DMX digital master to a Casambi network
• Enables remote selection of up to 20 predefined Casambi Scenes
• Second DMX channel adjusts scene intensity (0–100%)
• User-selectable DMX start address
• Powered by 12–24 VDC Class 2 supply

DMX Engineering

Lithernet Casambi Gateway

Model Number: CAS_Lithernet
• Supports bidirectional communication between systems
• Web interface for programming and configuration
• Supports up to 32 custom ASCII commands (in- and outgoing)
• Operates in transparent bridge mode

Lichtmanufaktur Berlin GmbH

Wall Switch Conversion Module

Model Number: X-Pack

• Converts legacy wall switches into Casambi controllers

• Supports rocker/toggle switches and momentary push buttons

• 4 configurable inputs with up to 8 state actions

• 5–48V DC input range with reverse voltage protection

Visiolite LLC

Wireless Key Card Reader

Model Number: BTT-C2AWH
• Battery-free wireless control
• Generic card functionality
• Can surface mount anywhere (screws or adhesive tape)

Illumra

8-Input Wireless Push Button Interface

Model Number: CBU-8Push
• Converts many 3rd party switches to Casambi Ready
• Up to 8 Configurable Push Button Inputs
• Assign Functions via Casambi App
• Compact, Battery-Powered or Low-Voltage Option

Dalcnet

Casambi Xpress

The listed Casambi product has been phased out to make way for new advancements. Stocks may be limited.

Casambi

CBU-TED

The listed Casambi product has been phased out to make way for new advancements. Stocks may be limited.

Casambi

CBU-ASR

The listed Casambi product has been phased out to make way for new advancements. Stocks may be limited.

Casambi

CBU-PWM4-4

Bluetooth controllable four channel PWM dimmer

Casambi